SoftStartHome Energy System 6-Ton
About this Item
Details
The SoftStartHome 6 Ton is a high-capacity soft starter built for larger residential and light commercial air conditioners, heat pumps, pool heaters, and other motor-driven devices up to 6 tons (72,000 BTUs). By reducing startup inrush current by up to 70%, it prevents power surges, eliminates excessive voltage drops, and ensures stable operation even when running on limited power sources such as small generators or battery storage.
Key Features
- Reduces Inrush Current: Lowers the initial surge current to prevent circuit breaker trips or light dimming
- Extends Equipment Lifespan: Reduces stress on motors and compressors, leading to longer durability.
- Backup Power Compatible: Allows operation with smaller generators and off-grid power sources.
- Quieter Operation: Eliminates loud startup noises for a smoother experience.
- Easy DIY Installation: Installs in under 15 minutes with no specialized tools required.
- Works with All Major Brands: Compatible with various HVAC and heat pump systems.
- Energy Efficient: Balances power demand, enabling multiple appliances to operate efficiently.
- Efficient A/C: Facilitates A/C operation on smaller generators or solar systems.
- Compatible with every major residential AC brand.
- Industry Recognized: Tested and Evaluated by ESCO Institute and HVAC Excellence
Why Choose SoftStartHome Energy System – Heavy Duty (6 Ton)?
- Avoids the need for costly rewiring or upgrading to larger generators.
- Provides uninterrupted operation during blackouts and outages.
- Comes with a 3-year warranty and free technical support.
- Built with high-quality materials for long-term durability and weather resistance.
Specifications
- Model: SSH6T
- Maximum Capacity: Up to 6 tons (72,000 BTUs)
- Voltage Compatibility: 120V / 240V AC
- Maximum Operating Current: 32A
- Startup Inrush Current Reduction: Up to 70%
- Frequency: 50Hz / 60Hz
- Power Consumption: <1W in standby mode
- Generator Compatibility: Works with 3,000W or larger generators
- Solar & Battery Compatibility: Compatible with battery-stored solar power systems
- Ingress Protection (IP) Rating: IP65 (weather-resistant, suitable for outdoor use)
- Operating Temperature Range: -40°F to 185°F (-40°C to 85°C)
- Dimensions: 6.5" x 3.9" x 2.4" (165mm x 100mm x 60mm)
- Weight: 1.8 lbs (0.8 kg)
- LED Indicators: Status, Power, Error diagnostics
- Wiring Configuration: Supports L1, L2, and Ground connections
- Installation Time: Less than 15 minutes
- Warranty: 3 years (with registration)
Troubleshooting
Power and Connection Issues
- Q: The unit does not turn on. What should I do?
A: - Verify that the power supply is properly connected.
- Check that the circuit breaker or fuse is not tripped.
- Ensure correct wiring according to the installation guide.
- Confirm voltage compatibility (110V or 220V).
- Q: The LED indicators are not lighting up. What could be the issue?
A: - Ensure proper wiring and secure connections.
- Check for a blown fuse or tripped breaker.
- Confirm power is reaching the connection terminals.
Startup and Performance Issues
- Q: My air conditioner or heat pump still experiences high inrush current.
A: - Double-check wiring connections.
- Verify the SoftStartHome is securely grounded.
- Ensure the correct model is used for your system (SSH3T for up to 3 tons, SSH6T for up to 6 tons).
- Q: My generator shuts down when starting my A/C.
A: - Ensure the generator meets the minimum wattage requirement (2,000W for SSH3T, 3,000W for SSH6T).
- Allow multiple startup cycles for the SoftStartHome to learn the startup profile.
- Check that the generator is properly grounded.
- Q: My system runs fine on shore power but struggles with a generator.
A: - Confirm that the generator provides stable voltage without excessive fluctuation.
- Reduce the load by turning off other appliances.
- Try resetting the generator and restarting the system.
Installation and Wiring Issues
- Q: The system does not recognize the SoftStartHome. What should I do?
A: - Verify that all connections match the wiring diagram exactly.
- Recheck wiring and refer to installation guides.
- Ensure L1, L2, and Ground connections are properly installed.
- Q: My A/C worked before installation, but now it will not start.
A: - Check for any loose or disconnected wires.
- Temporarily remove the SoftStartHome and reconnect the system to its original wiring to test.
- Inspect the capacitor and compressor for any faults.
Operational Problems
- Q: The compressor is not starting, but the fan runs. What could be the issue?
A: - Confirm that the compressor is receiving power.
- Ensure proper wiring to the compressor.
- Check for any loose or incorrect connections.
- Q: My A/C or heat pump keeps tripping the breaker after installation.
A: - Verify that the breaker size matches the manufacturer’s recommendations.
- Ensure that all wires are tightly connected and installed correctly.
- Check if other high-power appliances are running on the same circuit.
- Q: The SoftStartHome unit is making a clicking noise. Is this normal?
A: - A soft clicking sound is normal during operation.
- If clicking is continuous and the system is not starting, check wiring and power supply.
Error Indicators and Fault Codes
- Q: The LED is flashing, but the system does not start. What should I do?
A: - Check the troubleshooting section of the manual for LED fault patterns.
- Look for error codes from the A/C system and reset if necessary.
- Power cycle the system by turning off the breaker for 5 minutes before restarting.
- Q: My HVAC system displays an error code after installation. What could be wrong?
A: - Some smart systems detect startup changes—try resetting the system.
- Ensure correct wiring to the compressor and power supply.
Performance Optimization
- Q: My A/C still makes a hard start noise after installing SoftStartHome.
A: - Allow multiple startup cycles for the unit to optimize performance.
- Check if multiple high-power devices are running on the same circuit.
- Ensure the SoftStartHome is properly grounded.
- Q: The system sometimes hesitates before starting. What causes this?
A: - A slight delay is normal as the SoftStartHome optimizes power flow.
- If hesitation is prolonged, inspect wiring and ensure all connections are secure.
Environmental and Weather Concerns
- Q: My SoftStartHome is installed outdoors. Does it need additional protection?
A: - The unit is IP65-rated and weather-resistant.
- For prolonged exposure to direct sunlight or heavy rain, consider additional shielding.
- Q: Can extreme temperatures affect performance?
A: - The SoftStartHome operates in temperatures ranging from -40°F to 185°F (-40°C to 85°C).
- In extreme cold or heat, check for secure and insulated wiring connections.
Q&A
General Questions
Q: What is the SoftStartHome 6 Ton?
A: The SoftStartHome 6 Ton is a high-capacity soft starter designed for residential and light commercial equipment up to 6 tons, including air conditioners, heat pumps, pool heaters, and other motor-driven devices. It reduces startup inrush current by up to 70%, ensuring smooth and efficient operation even with limited power sources.
Q: What types of equipment can I use with the SoftStartHome 6 Ton?
A: The SoftStartHome 6 Ton is compatible with various equipment such as air conditioners, heat pumps, pool heaters, and other motor-driven devices up to 6 tons.
Technical Questions
Q: What is the nominal working voltage for the SoftStartHome 6 Ton?
A: The nominal working voltage is 110VAC (90135VAC) & 220VAC (187266VAC), single phase.
Q: How much power does the SoftStartHome 6 Ton consume?
A: The SoftStartHome 6 Ton consumes less than 3W of power.
Q: What is the maximum continuous working current?
A: The maximum continuous working current is 32A.
Installation and Usage
Q: How easy is it to install the SoftStartHome 6 Ton?
A: The SoftStartHome 6 Ton can be installed in less than 15 minutes with the included installation kit, making it quick and easy to set up.
Q: Can the SoftStartHome 6 Ton be used with generators?
A: Yes, the SoftStartHome 6 Ton is compatible with small generators, including 3,000-watt generators, making it a versatile solution for various power sources.
Benefits
Q: How does the SoftStartHome 6 Ton extend equipment life?
A: By reducing startup inrush current and electrical strain during startup, the SoftStartHome 6 Ton extends the lifespan of your equipment by preventing power surges and minimizing mechanical stress.
Q: Can the SoftStartHome 6 Ton save me money?
A: Yes, the SoftStartHome 6 Ton avoids the need for expensive rewiring or larger generators, making it a cost-effective solution for home applications.
Safety and Protection
Q: What kind of protection does the SoftStartHome 6 Ton offer?
A: The SoftStartHome 6 Ton features built-in overload protection, ensuring enhanced protection for your devices and extending their operational life.
Q: Is the SoftStartHome 6 Ton weatherproof?
A: Yes, the SoftStartHome 6 Ton is designed to be compact and weatherproof, making it suitable for various environments.
| Feature | SoftStartHome SSH6T | Other Brands |
| Reduces A/C Startup Amps by Up to 70% | ✔ | ✔ |
| Reduces Wear and Tear, Extends Compressor Life | ✔ | ✔ |
| Starts A/C with Generator During Emergencies | ✔ | ✔ |
| "Best in Industry" 3-Year Warranty | ✔ | ❌ |
| 15-Minute Easy Install - DIY or A/C Technician* | ✔ | ❌ |
| Does Not Need 5 "Learning" Cycles - Adds Install Time | ✔ | ❌ |
| Free US-based "Live" Tech Phone Support | ✔ | ✔ |
| Free Installation Kit - Connectors, Ties, Screws, Etc. | ✔ | ✔ |
| Compressor Overload Protection | ✔ | ✔ |
| 100,000-Cycle On/Off Reliability and Safety Testing | ✔ | ❌ |
| Smooth A/C Startup - No Thumps or Flickering Lights | ✔ | ✔ |
| Works for A/Cs, Fridges, Freezers, Pool Pumps | ✔ | ✔ |